Property | Solvent free ( water based ) |
Dry film thickness | 30mu/layer |
Theoretical coverage | 0.15kg/㎡/layer |
Touch dry | <30 minutes(25℃) |
Service life | > 10 years |
Ratio (paint: water) | 10:1 |
Construction tempature | >8℃ |
Paint colors | Transparency or Multi-colors |
Application way | Roller, spray or brush |
Storage | 5-25℃, cool, dry |
Pre-treated substrate
Special wood filler ( if necessary )
Primer
Wood furniture paint top coating
Varnish (optionally)
Application Scope | |
Suitable for furniture, wooden door, wood floor and other wood surfaces decoration and protection. | |
Package | |
20kg/barrel. | |
Storage | |
This product stored at above 0 ℃, well ventilation, shady and cool place. |
Construction Conditions
The construction conditions should not be in moisture season with cold weather (temperature is ≥10℃ and humidity is ≤85%). The below application time refers to normal temperature in 25℃.
Application Step
Surface preparation :
The surface should be polished, repaired, dust collected according to the site basic surface condition; Correct substrate preparation is critical for optimum performance. Surface should be sound, clean, dry and free from loose particles, oil, grease, and other contaminants.
Primer :
1) Mix ( A )Primer, ( B ) curinge agent and ( C ) thinner in a barrel according to ratio by weight;
2) Fully mix and stir in 4-5 min until without equal bubbles, ensure paint be fully stirred;The main purpose of this primer is to reach the anti-water, and seal the substrate completely and avoid air-bubbles in the body coating;
3) The reference consumption is 0.15kg/m2. Rolling, brush or spray the primer evenly (as the attached picture show) by 1 time;
4) Wait after 24 hours, the next application step to coat the top coating;
5) After 24 hours, according to the site condition, polishing can be done, this is optionally;
6) Inspection: ensure the paint film is evenly with uniform color, without hollowing.
Wood furniture paint top coating:
1) Mix ( A ) top coating, ( B ) curing agent and ( C ) thinner in a barrel according to ratio by weight;
2) Fully mix and stir in 4-5 min until without equal bubbles, ensure paint be fully stirred;
3) The reference consumption is 0.25kg/m2. Rolling, brush or spray the primer evenly (as the attached picture show) by 1 time;
4) Inspection: ensure the paint film is evenly with uniform color, without hollowing.
1) The mixing paint should be used within 20 minutes;
2) Maintain 1 week, can be used when paint is solid absolutely;
3) Film protection: keep away from stepping on, rain, exposing to sunlight and scratching until the film is fully dried and solidified.
The above information is given to the best of our knowledge based on laboratory tests and practical experience. However, since we cannot anticipate or control many conditions under which our products may be used, we can only guarantee the quality of the product itself. We reserve the right to alter the given information without prior notice.
Practical thickness of the paints can be little different from the theoretical thickness mentioned above due to many elements like environment,application methods,etc.